 |
|
| 30W Dual Output |
|
 APD-30A |
|
APD-30B |
|
| APID-30B |
|
|
|
| FEATURES |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
Short circuit/over load protection |
|
International AC input selected |
|
| Type No | Output | Tol. | R & N | Effi. | | CKD-30A | 5V, 0.5-4A | ±2 | 50mV | 72% | | 12V, 0.1-1A | ±3,-7% | 100mV | | CKD-30B | 5V, 0.5-4A | ±2 | 50mV | 74% | | 24V, 0.1-1A | ±3,-5% | 100mV | | CKID-30B | Same spec. as APD-30B except the output is isolated | | Input voltage | 85~132VAC/180~264VAC selected by SW | | Input frequency | 47~63Hz | | Inrush current | Cold start, 15A/115V & 30A/230V | | Output voltage | Refer to above (CH1: +10%, -5% ADJ.) | | Overload protection | 105% ~ 150% output foldback limiting | | Setup, rise, hold up time | 200ms, 50ms, 30ms | | Withstand voltage | I/P-O/P: 1.5KV, 1/P-FG: 1.5KV, 1 min. | | Working temp | 0~50°C@100%, -10°C@80%, 60°C@60% | | Safety Standard | Design refer to UL 1012 requirement | | EMC Standard | Design refer to FC part 15J | | Connection | 7P/9.5mm pitch terminal block |
|
|
|
|
中国
产品
