| BASIC FUNCTION |
 Frame/Housing: |
 Material for size larger than 60x60x10mm is Thermoplastic UL 94V-0 PBT (30% Fiber) |
| Material for size equal or smaller than 60x60x10mm is Thermoplastic UL 94V-0 PBT (15% Fiber) |
| Fan blade: |
| Material is Thermoplastic UL 94V-0 PBT (15% Fiber) |
| Lead wire: |
| AWG # 28/30 for size equal or smaller than 40x40x8mm, 150mm length, material is UL approved
|
| AWG # 26/28 for size between 40x40x10mm to 60x60x15mm, 300mm length, material is UL approved |
| AWG # 24/26 for size between 60x60x25mm to 120x120x38mm, 300mm length, material is UL approved |
| Insulation resistance: |
| Minimum 10MΩ at 500VDC between housing and both lead wires |
| Dielectric strength: |
| Withstand 600VAC for one minute 1mA between housing and both lead wires |
| Operating temperature: |
| -10°C~+70°C, high/low temperature test for 24 hours, temperature change: 30¢XC/hour |
| Storage temperature: |
| -40°C~+70°C, high/low temperature test for 24 hours, temperature change: 30¢XC/hour |
| Basic locked rotor protection: |
| no coil & board damaged |
| Optional device: |
| Lock rotor protection with FG/RD signal output |
| Temperature sensor |
| Tachometer output |
中国
产品
SELECT THE DIMENSION 
