|
|
|
|
35W Single Output |
|
AP-35-5 |
|
AP-35-12 |
|
AP-35-15 |
|
AP-35-24 |
|
|
|
FEATURES |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
Short circuit/over load protection |
|
Type No | Output | Tol. | R & N | Effi. | CK-35-5 | 5V, 7A | ±2 | 75mV | 70% | CK-35-12 | 12V, 3A | ±1 | 100mV | 76% | CK-35-15 | 15V, 2.4A | ±1 | 100mV | 78% | CK-35-24 | 24V, 1.5A | ±1 | 100mV | 78% | Input voltage | 85~132VAC/180~264VAC selected by SW | Input frequency | 47~63Hz | Inrush current | Cold start, 15A/115V, 30A/230V | Output voltage | Refer to above (±10% ADJ.) | Overload protection | 105% ~ 150% output foldback limiting | Setup, rise, hold up time | 200ms, 100ms, 30ms | Withstand voltage | I/P-O/P: 1.5KV, 1/P-FG: 1.5KV, 1 min. | Working temp | 0~50°C@100%, -10°C@80%, 60°C@60% | Safety Standard | Design refer to UL 1012 requirement | EMC Standard | Design refer to FCC part 15J | Connection | 5P/9.5mm pitch terminal block |
|
|
|
|
|
about us | contact us | site map
|
© 2012 CoolMax Technology Inc. All Rights Reserved. |
|
|