|
 |
 |
|
| 25W Single Output |
|
 AP-25-5 |
|
AP-25-12 |
|
| AP-25-15 |
|
AP-25-24 |
|
|
|
| FEATURES |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
Short circuit/over load protection |
|
| Type No | Output | Tol. | R & N | Effi. | | CK-25-5 | 5V, 3A | ±2 | 50mV | 72% | | CK-25-12 | 12V, 12.1A | ±1 | 100mV | 76% | | CK-25-15 | 15V, 1.7A | ±1 | 100mV | 77% | | CK-25-24 | 24V, 11.1A | ±1 | 100mV | 80% | | Input voltage | 85~264VAC full range | | Input frequency | 47~63Hz | | Inrush current | Cold start, 15A/115V, 30A/230V | | Output voltage | Refer to above (±10% ADJ.) | | Overload protection | 105% ~ 150% output pulsing mode | | Over voltage protection | 115% ~ 135% of output voltage | | Setup, rise, hold up time | 800ms, 50ms, 10ms/115VAC | | 300ms, 50ms, 80ms/230VAC | | Withstand voltage | I/P-O/P: 3KV, 1/P-FG: 1.5KV, 1 min. | | Working temp | 0~50°C@100%, -10°C@80%, 60°C@60% | | Safety Standard | Design refer to UL 1012 and TUV EN60950 requirement | | EMC Standard | EN55022 class B, EN61000-4-2,3,4,5, EN61000-3-2,3 | | Connection | 5P/9.5mm pitch terminal block |
|
|
|
|
|
|
about us | contact us | site map
|
|
© 2012 CoolMax Technology Inc. All Rights Reserved. |
|
|
Products
