|
 |
 |
|
| 100W Triple Output |
|
 APT-100C |
|
APT-100D |
|
|
|
| FEATURES |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
Short circuit/over load protection |
|
Over voltage protection |
|
International AC input selected |
|
| Type No | Output | Tol. | R & N | Effi. | | CKT-100C | 5V, 2-12A | ±2% | 80mV | 77% | | 15V, 0.2-2.5A | ±6% | 150mV | | -5V, 0.1-1A | ±6% | 150mV | | CKT-100D | 5V, 2-12A | ±2% | 80mV | 79% | | 12V, 0.1-22A | ±6% | 150mV | | 24V, 0.2-2A | ±6% | 150mV | | Input voltage | 85~132VAC/180~264VAC selected by SW | | Input frequency | 47~63Hz | | Inrush current | Cold start, 20A/115V, 40A/230V | | Output voltage | Refer to above (CH1: +10%, -5% ADJ.) | | Overload protection | 105% ~ 150% output shutdown | | Setup, rise, hold up time | 200ms, 50ms, 16ms | | Withstand voltage | I/P-O/P: 1.5KV, 1/P-FG: 1.5KV, 1 min. | | Working temp | 0~45°C@100%, -10°C@80%, 60°C@60% | | Safety Standard | Design refer to UL 1012 requirement | | EMC Standard | Design refer to FCC part 15J | | Connection | 8P/9.5mm pitch terminal block |
|
|
|
|
|
|
about us | contact us | site map
|
|
© 2012 CoolMax Technology Inc. All Rights Reserved. |
|
|
Products
