|
|
|
|
120W Dual Output |
|
APD-120A |
|
APD-120B |
|
|
|
FEATURES |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
Short circuit/over load protection |
|
Type No | Output | Tol. | R & N | Effi. | CKD-120A | 5V, 2-12A | ±2 | 60mV | 78% | 12V, 0.5-5A | ±6 | 120mV | CKD-120B | 5V, 2-10A | ±2 | 60mV | 80% | 24V, 0.4-4A | ±7 | 150mV | Input voltage | 90~132VAC/180~264VAC selected by SW | Input frequency | 47~63Hz | Inrush current | Cold start, 30A/115V & 230V | Output voltage | Refer to above (CH1: +10%, -5% ADJ.) | Overload protection | 105% ~ 150% output shutdown | Over voltage protection | CH1: 115% ~ 135% of output voltage | Setup, rise, hold up time | 200ms, 50ms, 20ms | Withstand voltage | I/P-O/P: 3KV, 1/P-FG: 1.5KV, 1 min. | Working temp | 0~50°C@100%, -10°C@80%, 60°C@40% | Safety Standard | Design refer to UL 11950, TUV EN60950 | EMC Standard | Design refer to EN55022 class B, EN61000-4,2,3,4,5, EN605555-2,3 | Connection | 8P/9.5mm pitch terminal block |
|
|
|
|
|
about us | contact us | site map
|
© 2012 CoolMax Technology Inc. All Rights Reserved. |
|
|